Filling The Water Tank; Venting - melitta CAFFEO SOLO&perfect milk Manual De Instrucciones

4.5

Filling the water tank

•
Flip up the lid of the water tank (Fig. A, No. 7) and pull the water tank
up and out of the appliance.
•
Fill the water tank to the maximum mark with fresh tap water and
reinsert it.
Notes
If the water tank runs empty during operation (e.g. during the coffee dispensing
process), the symbol for the water tank will be illuminated. The current
operation will be stopped and the water tank must be fi lled before starting a
new operation.
4.6

Venting

Caution!
The appliance may only be vented without the Melitta
with a full water tank.
Insert the Melitta
–
Fill the water tank with fresh tap water to the max. mark before switching
–
the appliance on.
•
Press the ON / OFF button
→ The symbol for the valve
must be vented through the Cappuccinatore to ensure that there is no more
air in the water passages.
•
Place a large vessel under the Cappuccinatore.
•
Turn the valve switch (Fig. A, No. 11) clockwise to the stop to open the
valve.
→ The valve symbol
Cappuccinatore.
•
When water is no longer dispensed and the symbol for the valve
illuminated, turn the valve switch anti-clockwise to the stop to close the
valve.
→ The appliance is ready for operation.
54
water fi lter into the water tank only after venting.
® Claris ®
to switch the appliance on.
then appears on the display. The appliance
now fl ashes. Water will fl ow into the vessel under the
water fi lter and
® Claris ®
is