Product Description And Specifications; Intended Use; Product Features - Bosch GTS 10 J Professional Manual Original

All manuals and user guides at all-guides.com
OBJ_BUCH-1325-001.book Page 38 Saturday, January 22, 2011 12:54 PM
38 | English
Symbol
Product Description and
Specifications
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.

Intended Use

The power tool is intended as a stationary ma-
chine for making straight lengthways and cross-
ways cuts in hard and softwood, as well as in
particle and fibre board. In this, mitre angles
from –60° to +60° as well as bevel angles from
–2° to 47° are possible.
When using appropriate saw blades, sawing alu-
minium profiles and plastic is also possible.
1 609 929 X56 | (22.1.11)
Meaning
Left side
Indicates the rotation direction
of the handwheel for lowering
(transport position) and rais-
ing (working position) the saw
blade.
If required, lubricate the power tool at the indicated locations.

Product Features

The numbering of the components shown refers
to the representation of the power tool on the
graphic pages.
1 Scale for clearance of the saw blade to the
parallel guide 10
2 Guide groove for parallel guide 10
3 Angle stop
4 Recessed handles
5 Guide groove for angle stop
6 Blade guard*
7 Vacuum connection on the blade guard
8 Clamping lever for locking the blade guard
9 Saw table
10 Parallel guide
11 V-guide groove of parallel guide
12 Mounting holes
13 Carrying handle
14 Saw-Table extension
15 Tensioning lever for saw-table extension
16 Fastening bracket for saw stand GTA 600
17 Locking lever for adjustment of bevel angles
18 Handwheel
19 Crank for lowering and raising the saw blade
Right side
Indicates the position of the
locking lever for locking the
saw blade and for adjusting the
bevel angle (saw blade tilta-
ble).
Bosch Power Tools