IPC CT105 Manual De Instrucciones página 47

This machine is intended for use in commercial applications, such as hotels, schools, hospitals,
factories, shops and offices, or for hire.
The machine must only be used indoors.
Warning, the machine must be kept in closed environments at all times.
Do not use the machine in inadequate lighting, explosive atmospheres, on public roads, to clean dirt
that is hazardous to health (dust, gas, etc.) or in unsuitable environments.
The machine is designed to operate in temperatures between +4°C and +40°C. It can be stored in
temperatures between +0°C and +50°C when not in use.
The machine is designed to operate at relative humidity levels between 30% and 95%.
Never use the machine to clean up flammable or explosive liquids (e.g. petrol, fuel oil, etc.), acids or
solvents (e.g. paint solvents, acetone etc.) even if diluted. Never clean up burning or incandescent
objects.
Never use the machine on slopes or ramps more than specified in "Technical specifications"; never
drive sideways across even gentle slopes. Always manoeuvre with care and avoid reversing. When
transiting steeper ramps or slopes, take the utmost care to prevent tipping and/or uncontrolled
acceleration.
Never park the machine on a slope.
Never leave the machine unattended with the motor or engine on. Before leaving it, turn the motor
or engine off and make sure it cannot move accidentally.
Always pay attention to other people, especially children, in the place where you are working.
Children must be supervised to make sure they do not play with the machine.
The machine is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they are supervised by a person
responsible for their safety and have received instruction in the use of the machine.
Never use the machine to transport people or goods or to tow things.
Do not tow the machine.
Never rest objects of any weight on the machine for any reason.
Never obstruct the ventilation and heat dispersion openings.
Never remove, modify or circumvent safety devices.
Numerous unpleasant experiences have shown that a wide range of personal objects may cause
serious accidents. Before beginning work, remove jewellery, watches, ties, etc..
The operator must always use personal protection devices: protective apron or overalls, non-slip
waterproof shoes, rubber gloves, protective goggles and ear protectors and mask to protect the
respiratory tract.
Keep hands away from moving parts.
Make sure the power sockets used for the battery charger are connected to a suitable earth system
and protected by thermal magnetic and earth leakage breakers.
Make sure the electrical characteristics of the machine (voltage, frequency, power) given on the
nameplate correspond to those of the mains electricity supply.
It is indispensable to respect the battery manufacturer's instructions and applicable legislation. The
batteries should always be kept clean and dry to avoid surface leakage current. Protect the batteries
from impurities such as metal dust.
Never rest tools on the batteries as they could cause short circuits leading to explosions.
When using battery acid, always follow scrupulously the safety instructions given in the "Batteries:
preparation" section.
Battery charger (OPTIONAL): check the power cable regularly for damage. If the power cable is
damaged, do not use the charger; to replace the cable, contact a specialist service centre.
If particularly strong magnetic fields are present, assess their possible effect on the control elec-
tronics.
To recharge the batteries, always use the battery charger supplied with the machine (when provi-
ded).
Never wash the machine with water jets.
In the case of malfunction and/or faulty operation, turn the machine off immediately (disconnecting
it from the mains power supply or batteries) and do not tamper with it. Contact a service centre
GB
15