3 - SPecIfIcatIonS
3.7 Warning symbols
General warning
Duty of reading the use & maintenance
manual
Compulsory head protection
4
- InStallatIon and Pre-uSe checKS
4.1 Assembling the tool
•
Remove the tool (2) from its box.
Assemble the rakes (1) and teeth onto their supports (7 and 8, see picture C). The teeth support (4) is fitted with a small
anti-proof protrusion. Lock the rakes in their seat by tightening the screws (13) on the connections (picture E).
4.2 Assembling the tool onto the extension pole
•
Assemble the tool onto the extension pole, insert the shaft and tighten the screws (11) of the clamp connection (picture B).
4.3 Control devices
•
All information are in the use and maintenance manual of the chosen power unit.
20 - 68
60 - 68
20 - 96
Compulsory adequate clothing
Compulsory hands protection
Compulsory feet protection