Assembly Instruction; Base Installation - V-TAC VT-5566 Manual Del Usuario

ASSEMBLY INSTRUCTION

BASE INSTALLATION

1. Remove the parts from packing.
2. Snap the two parts of base
together.
3. Pass the power cord through the
centre of hole of the base, after
snapping the two pieces together.
4. Line up the fan on the base, and
fix with base lock.
No screw(s) is(are) needed to
lock the base.
Body
OPERATING INSTRUCTION
NOTE: Before inserting the plug into a power outlet, make sure that the
correct voltage is being used which corresponds to the information which
is indicated on the rating label, and that the socket has an earth facility.
Caution: Fan must be assembled with the base before use!
Fan can be operated by the control panel located on top of the Fan or by
remote control.
Base
Base Lock