Product Assembly - V-TAC VT-4016–5 Manual De Instrucciones

PRODUCT ASSEMBLY

FIG 1
Step 1. Take the two base
cross members (18) and
push the 4 base end caps
(19) into the ends if not
already fitted and then cross
them over together.
FIG 2
Step 2. Remove the four
screws from the two base
members and attach the
lower base pole (15) to the
base using a pozidrive
screwdriver (not supplied).
ENGLISH
FIG 3
Step 3. Unscrew and
remove the pole clamp (14
– shown in step 2 above)
and slide the screw cover
(16) down over the adjust-
able and lower base pole
(13 & 15) until it is in place
over the screws.