Residual Risks; Package Contents - DeWalt DWS778 Traducido De Las Instrucciones Originales

WARNING: We recommend the use of a residual
current device with a residual current rating of 30mA
or less.

Residual Risks

The following risks are inherent to the use of saws:
– injuries caused by touching the rotating parts.
In spite of the application of the relevant safety regulations and
the implementation of safety devices, certain residual risks cannot
be avoided. These are:
– Impairment of hearing.
– Risk of accidents caused by the uncovered parts of the
rotating saw blade.
– Risk of injury when changing the unprotected saw blade.
– Risk of squeezing fingers when opening the guards.
– Health hazards caused by breathing dust developed when
sawing wood, especially oak, beech and MDF.
The following factors increase the risk of breathing problems:
– No dust extractor connected when sawing wood.
– Insufficient dust extraction caused by uncleaned exhaust
filters.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use
Wear ear protection
Wear eye protection
Carrying point
Keep hands away from blade
DATE CODE POSITION (FIG. 2)
The Date Code (V V), which also includes the year of
manufacture, is printed into the housing.
Example:
2016 XX XX
Year of Manufacture

Package Contents

The package contains:
1 Partly assembled cross-cut mitre saw
2 Hex keys 4/6 mm
1 250 mm TCT saw blade
1 Material clamp
1 Instruction manual
• Check for damage to the tool, parts or accessories which
may have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Description (Fig. 1, 2, 7, 11, 12)
WARNING: Never modify the power tool or any part
of it. Damage or personal injury could result.
A. Trigger switch
B. Guard lock-up release lever
C. Operating handle
D. Fixed upper guard
E. Outer flange
F. Blade bolt
G. Lower blade guard
H. Saw blade
I. Sliding fence lock lever (Fig. 11)
J. Fixed table
K. Kerf plate
L. Mitre arm
M. Mitre latch
N. Rotating table/mitre arm
O. Mitre scale
P. Mitre scale screws (Fig. 12)
Q. Sliding fence
R. Dust extraction nozzle
S. Traverse lock
T. Bevel clamp handle
U. Bevel scale
V. Bench mounting holes
W. Lock-down button
X. Traverse bars
Y. Saw head
Z. Hex keys
AA. Cable clamp
BB. Padlock hole
CC. Override button
DD. Carrying indentations (left and right)
EE. Inner flange (Fig. 7)
FF. Material clamp
GG. XPS Worklight on/off switch
TM
HH. XPS Worklight
TM
II. Twist lock connector (DWV9000, optional accessory)
INTENDED USE
Your D WALT Cross-Cut Mitre Saw has been designed for
e
professional cutting of wood, wood products, plastics and
aluminium. It performs the sawing operations of cross-cutting,
bevelling and mitring easily, accurately and safely.
When assembled with a suitable saw blade, this machine
is designed for cutting aluminium profiles up to a maximum
thickness of 4.0 mm. NEVER cut magnesium.
This unit is designed for use with a nominal blade diameter
250 mm carbide tip blade.
DO NOT use under wet conditions or in presence of flammable
liquids or gases.
These miter saws are professional power tools.
DO NOT let children come into contact with the tool. Supervision
is required when inexperienced operators use this tool.
english
29