Genius Speed Wheel RV Manual Del Usuario página 2

1. Setting-up your Speed Wheel RV (FF)
Follow these steps to install your Speed Wheel RV(FF):
(1) Use the four suction cups on the bottom of the wheel base to firmly position the
wheel and shifter module by just pushing down hard on a smooth surface like a t
(2) Conne ct and tightly screw the ''Y-type'' mounting clamp to the edge of the table and
through the two hidden holes on the front panel of the wheel's base.
(3) Connect the gas/break pedal and shifter module to your Speed Whee
the cables.
We recommend you use both steps (1 & 2) to position the wheel firmly and
make sure that the wheel will not come loose during game playing.
2. Installation for PC system
(1) Make sure your computer p
(2) Insert the driver disc into the CD-ROM drive, and t
start automatically. If not, start the setup program manually by selecting
Start/Run and type in "E:\setup" (where "E" represents the location of the
(3) Follow the instructions on the screen to finish the driver installation.
(4) After the soft installation is completed, you can plug the USB wheel c
(5) Connect the AC Adapter power with the steering wheel chassis. At this moment the wheel will turn right and left for regu
and testing, so please don't touch the wheel. (for Force Feedback Model only)
(6) Click Start / Setting / Control Panel and double click on"Game controller"or"G
(7) Make sure the wheelbase is positioned firmly and place the pedals on the floor in a convenient-to-reac
Note: Not on an easy-to-slip surface
(8) Plug the pedal's connector to the steer
(9) You can calibrate and test your game controller in
(10) When you finish the calibration and test, you can play any game.
Important:
- The driver will work with the DirectX 7.0a or newer version in the PC system. Check the DirectX version on your system, and
upgrade if necessary.
- The vibration effect oc curs according to game software.
3. Operation and function
There are 12 function buttons
gaming software.
LED indicator:
8 ways D-Pad
Button 5
Button 7
Button 9
Button 11
T urbo set up
(1) Press and h old the Turbo button first.
(2) Press "once" the button you want to se
(3) After establishing the Turbo function, when you press the button that has become a
flashing. If you don't press any button set up to be a Turbo function, the LED mode will always be bright.
(4) To remove the Turbo function, press and hold the Turbo button and press the button which was set up to be T
the LED mode will always be bright.
ower is on.
ing wheel.
built in to the Speed Wheel RV(FF) Series and each has a different function depending on your
Analog mode
Red
Button 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
Mode Button, Turbo/Clear Button
8 way D-pad/POV
Button 3
Turbo Mode
t up in auto repeat or fast fire state (Turbo).
l RV(FF) using
he setup program will
CD-ROM drive), then press the Enter key.
able connector to the USB port on your computer.
the "Game controller" or "Gaming Options" screen.
LED indicator: G
View Finder（POV）
Button 4
Button6
Button 2
Button 1
Button 8
Button 1
Button 10
Button 12
1
able.
SHIFTER PEDAL POWER
aming Options"icon.
h location.
Digital mode
reen
Button 2
*Gear Shifter Set only for
Speed Wheel RV FF.
Turbo function, the LED mode LED is
ENGLISH
lation
urbo again. Now