Cadel AQUOS15 Manual De Instrucciones página 76

EXTERNAL THERMOSTAT CONNECTION (e)
EXTERNAL THERMOSTAT (not included with the boiler, to be provided by the user).
The temperature of the boiler can also be controlled by an external room thermostat. It is located in a
central position of the room where the boiler is installed. It provides a closer match between the heating
temperature requested of the boiler and what it actually provides.
EN
Connect the cables from the external thermostat to points 1-2 of the terminal block on the boiler.
Once the thermostat has been connected one must enable it.
In order to do this, proceed as follows:
• Press the "menu" button.
• Scroll to "Settings" using the arrows.
• Select by pressing "menu".
• Scroll once again to "External thermostat" using the arrows.
• Select by pressing "menu".
• Press the - + buttons.
• Select "On" to activate the external thermostat.
• Press the "menu" button to confirm.
• Press the "esc" button to exit.
76
Fig. 25 - Electrical thermostat connection
LEGEND
POS. 1-2
External thermostat
POS. 3-4
Puffer/boiler probe
POS. 5
Earthing
POS. 6-7 Additional boiler
AQUOS - IDRON