Cadel AQUOS15 Manual De Instrucciones página 72

• Press the "menu" button.
• Scroll to "Settings" using the arrows
• Press "menu" to confirm.
• Scroll to "Maximum power" using the arrows.
• Press "menu" to confirm.
• Change the power from 01 to 05 with the + - keys
EN • Press "menu" to confirm and "esc" to exit
o - Components test
To activate the "Components test" function (only when the boiler is switched off) act as follows:
• Press the "menu" button.
• Scroll to "Settings" using the arrows
• Press "menu" to confirm.
• Scroll to "Components test" using the arrows.
• Press "menu" to confirm.
• Select the test to be performed with the + - keys
• Press "menu" to confirm and "esc" to exit
p - Chimney sweep function
To activate the "Chimney sweep" function act as follows:
• Press the "menu" button.
• Scroll to "Settings" using the arrows
• Press "menu" to confirm.
• Scroll to the "Chimney sweep" function using the arrows.
• Press "menu" to confirm.
• Select "On" with the + - keys (Off by default)
• Press "menu" to confirm and "esc" to exit
q - System configuration
To change the system configuration act as follows:
• Press the "menu" button.
• Scroll to "Settings" using the arrows
• Press "menu" to confirm.
• Scroll to "System configuration" using the arrows.
• Press "menu" to confirm.
• Change the configuration from 01 to 05 with the + - keys
• Press "menu" to confirm and "esc" to exit.
r - Season
To change the function act as follows:
• Press the "menu" button.
• Scroll to "Settings" using the arrows
• Press "menu" to confirm.
• Scroll to "Season" using the arrows.
• Press "menu" to confirm.
• Select "Summer" or "Winter" with the + - keys.
• Press "menu" to confirm and "esc" to exit.
s - Technical menu
To access the technical menu one must contact an assistance centre as one needs a password to enter.
To intervene on the "technical menu" act as follows:
• Press the "menu" button.
• Scroll to "Settings" using the arrows
• Press "menu" to confirm.
• Scroll to "Technical menu" using the arrows.
• Press "menu" to confirm.
• Select "Product Type", "Service", "Parameters", "DHW Parameters", "Meters memories", "Enable fan"
and "Puffer data" with the + - keys.
• Press "menu" to confirm and "esc" to exit
72
AQUOS - IDRON