INSTRUCTIONS FOR USE
Troubleshooting Guide:
This device does not have a troubleshooting guide. For technical support user
of the device shall first contact his or her supplier.
Device Maintenance:
Make sure that all labels are installed and can be read. Replace labels as
necessary by using a plastic scraper to remove the label. Use an alcohol wipe to
remove any adhesive residue.
Contact Allen Medical Systems, Inc. if you need to repair or replace the device
contact us using the information from the contact details section (1.3).
Annual Maintenance
Slide soft cotton gauze along carbon fiber rail. Wear may be apparent by
•
carbon fiber splinters catching particles of the gauze. Light splinters may be
sanded down with 300 grit paper.
Ensure rubber feet are intact under base.
•
Ensure Floor Lock Pads are present and in use with system.
•
4. Safety Precautions and General Information:
General Safety Warnings and Cautions:
WARNING:
a. Do not use if product shows visible damage.
b. Prior to using this device, please read the instructions for equipment set up and
use. Familiarize yourself with the product before application on a patient.
c. To prevent patient and/or user injury and/or equipment damage, examine the
device and surgical-table side rails for potential damage or wear prior to use. Do
not use the device if damage is visible, if parts are missing or if it does not function
as expected.
d. To prevent patient and/or user injury and/or equipment damage, verify the
device attaching clamps completely touch the table-side rails and are firmly in
place. Test the locking mechanism to ensure no movement when elevated or
pushed.
e. Surgical table floor locks must be engaged at all times during use.
f. Floor must be clean and free of particles prior to use.
g. Never flex and tilt at the same time.
h. By exceeding 500 lbs (226 kg) weight capacity tip hazard can occur (do not
exceed surgical table weight rating).
i.
Rotating-style surgical tables must be secured from rotation during use.
Document Number: 80028282
Version: B
Page 29
Issue Date: 15 APR 2020
Ref Blank Template: 80025118 Ver. E