Tabla de contenido
Idiomas disponibles
Idiomas disponibles
_<(
Description
- Rear PaneJ
_:_
@
@
2
3
4
5
1. DIGmTAL OUT Jacks
Use either an optical or coaxial digital cable to connect to an AV amplifier with a built-in decoder (AV control center).
2. AUDIO OUT Jacks
Connect to the Audio input jacks of A/V-compatible
TV or wide screen TV, Stereo system.
3. VIDEO OUT Jack
Use a video cable to connect one of the jacks to Video input on your A/V-compatible TV, wide screen TV, or Stereo system.
4. COMPONENT
VIDEO OUT Jacks
Use these jacks if you have a TV with Component Video in jacks. These jacks provide C_/PRCdPB and Y video. Along
with S-Video, Component Video provides the best picture quality.
5. S-VIDEO OUT Jack
Use the S-Video cable to connect this jack to the S-Video jack on your A/V-compatible
TV or wide screen TV for a higher
quality picture.
Selecting
Progressive
Scan
(E25p/480p
or interlaced
525i/480i)
Playback
o If your TV is compatible with progressive
scanning (525p/480p), connect the TV to the COMPONENT
VIDEO OUT jacks of
the DVD player and set 'PROGRESSIVE'
to "ON' in the display setting. Next, set your TV to the progressive
scan mode.
Refer to page 22 for instructions on changing the display setting. RSCAN will appear on the display of the unit.
® If your TV is not compatible with progressive
scanning, set "PROGRESSIVE'
to 'OFF' (refer to page 22). Make sure that
RSCAN on the display of the unit lights off.
o Use a commercially
available adaptor if the video input jacks of your TV or monitor is the BNC type.
What is Progressive
Scanning?
o Unlike conventional
interlace scanning, the progressive
scan system provides less flickering and images in higher resolution
than that of traditional (525i/480i) television signals.
[_,_anufactured Under Hcense from Do_by Laboratories,
"D01by" and the douMe=D aymbom are trademarks
Of Do!by Laboratories,
tlDTS!! and ffDTS Oig!ta! Out:! are trademarks
of O!g!ta!Theater Systems, !he,
-11
-
EN
Tabla de contenido
