Fama GS Serie Manual De Instruccion página 21

Except where differently specified, the personnel which performs the installation interventions,
connection, maintenance, reassembly, and reuse, damages or breakdowns, demolition and dismantling
must be a skilled personnel qualified in safety matter and educated on the residual risks, with the
competencies, in safety matter, of the maintenance employees.
ENVIRONMENTS, WORKING AND PASSING PLACES
The work environment must answer to the directive 89/654/CEE requirements. In the working area foreign object must not be
present. The employer, in the directive 89/391/CEE respect, concerning the measures realization turned to promote the safety
and workers health improvement during the work, must provide to eliminate or reduce the showed residual risks as foreseen in
the present manual.
WARNINGS ON THE RESIDUAL RISKS
RESIDUAL RISK DUE TO THE FIXED PROTECTIONS REMOVAL, INTERVENTIONS ON BROKEN/WORN
PARTS
For any evenience the operator must not try to open or remove a fixed protection or tamper a safety
device.
In the phase of equipment, maintenance and cleaning, and during all further manual operations that
happens introducing the hands or other body parts in the machine dangerous areas, a residual risk remains due
above all to:
1. Knocks with machine manufacturing parts,
2. Grazing and/or abrasion with machine rough parts,
3. Sharp pain with the sharpened parts,
4. Cut with tools sharpened parts.
Besides, the operator and the maintenance man must be skilled for the intervention connected to the manual
operations with open protections, must be trained on the joined consequent risks and must be authorised from
a responsible person.
PROTECTION DEVICES ON THE MACHINE
The machine protections and safety devices must not be removed.
If they must be removed for extraordinary maintenance requirements some measures will have to be
immediately adopted ready to put in evidence and to reduce at the possible minimum limit the danger.
The putting back in its place of the protection or of the safety device must happen as soon as the reasons, that
have made necessary their temporary removal, are stopped.
The machine transmission parts are completely isolated by means of fixed protections which don't allow the access for none
kinematical chain.
For all safety functions including the control and check systems parts joined to the safety, some well-tested components and
safety principles have been used.
Grater group:
1. Taking into account of the machine use modality and its use destination, the moving elements aren't isolated from fixed
protections, moving protections or other safety devices.
2. On handle and pressure group a micro switch is placed, which stops the grater roll rotation when it is possible to access
through the grater mouth;
3. In the inferior zone of the grater group in correspondence of the grated product exile a grating form fixed protection is
present, which prevent the fingers access towards the grater roll.
4. The machine is equipped with electronic motor brake that allows to the grater roll to stop within 2 sec.
Grating form
Fixed
protection
Pressure
handle with
micro switch
ORIGINAL INSTRUCTIONS TRANSLATION Pag. di
7 13