Nice TTN3724HS Instrucciones Y Advertencias Para La Instalación Y El Uso página 18

GENERAL WARNINGS: SAFETY - INSTALLATION - (original instructions in Italian)
>>> Attention! Important safety instructions. Follow all instructions as improper installation may cause serious damage.
>>> Attention! Important safety instructions. It is important for you to comply with these instructions for your own and other
people's safety. Keep these instructions.
• Before commencing the installation, check the "Technical characteristics" (in this manual), in particular whether this product is suitable for automating
your guided part. If it is not suitable, DO NOT continue with the installation.
• The product cannot be used before it has been commissioned as specified in the chapter on "Testing and commissioning".
>>> Attention! According to the most recent European legislation, the implementation of an automation system must comply
with the harmonised standards provided by the Machinery Directive in force, which enables declaration of the
presumed conformity of the automation. Taking this into account, all operations regarding connection to the
electricity grid, as well as product testing, commissioning and maintenance, must be performed exclusively by
a qualified and skilled technician!
• Before proceeding with the installation of the product, check that all the materials are in good working order and suited to the intended applications.
• This product is not intended to be used by persons (including children) whose physical, sensory or mental capacities are reduced, or who lack the neces-
sary experience or skill.
• Children must not play with the appliance.
• Do not allow children to play with the fixed control devices of the product. Keep the remote controls away from children.
>>> Attention! In order to avoid any danger from inadvertent resetting of the thermal cut-off device, this appliance must not be
powered through an external switching device, such as a timer, or connected to a supply that is regularly pow-
ered or switched off by the circuit.
• Provide a disconnection device (not supplied) in the plant's power supply grid, with a contact opening distance permitting complete disconnection under
the conditions dictated by overvoltage category III.
• Handle the product with care during installation, taking care to avoid crushing, denting or dropping it, or allowing contact with liquids of any kind. Keep
the product away from sources of heat and naked flames. Failure to observe the above can damage the product, and increase the risk of danger or
malfunction. Should this happen, stop installation immediately and contact Customer Service.
• The manufacturer assumes no liability for damage to property, items or persons resulting from non-compliance with the assembly instructions. In such
cases the warranty for material defects is excluded.
• The weighted sound pressure level of the emission A is lower than 70 dB(A).
• Cleaning and maintenance to be carried out by the user must not be carried out by unsupervised children.
• Before working on the system (maintenance, cleaning), always disconnect the product from the mains power supply.
• Check the system periodically, in particular all cables, springs and supports to detect possible imbalances, signs of wear or damage. Do not use, if
repairs or adjustments are necessary, since installation failure or an incorrectly balanced automation may cause injury.
• The packing materials of the product must be disposed of in compliance with local regulations.
• When operating a biased-off switch, make sure that other persons are kept away.
• When operating the gate, keep an eye on the automated mechanism and keep all bystanders at a safe distance until the movement has been com-
pleted.
• If the power cable is damaged, it must be replaced by the manufacturer or by an appointed servicing company or similarly qualified person in order to
prevent any form of risk.
• Do not operate the product if anyone is working nearby; disconnect its power supply before permitting such work to be done.• Attention! Transport the
product using the relevant hand trolley and the handles on the package to ensure that the operations are conducted safely.
• Prior to installing the drive motor, check that all mechanical components are in good working order and properly balanced, and that the automation
moves correctly.
• If the gate or door being automated has a pedestrian gate, then the system must include a control device that will inhibit the operation of the motor when
the pedestrian gate is open.
• Make sure that the control devices are kept far from moving parts but nonetheless in a visible position.
• Unless a selector is used, the control devices must be installed at a height of at least 1.5 m and must not be accessible.
• That windows, having a gap exceeding 200 mm when open, are to be closed using a biased-off switch if the opening movement is controlled by a fire-
sensing system.
• Ensure that entrapment between the driven part and the surrounding fixed parts due to the opening movement of the driven part is avoided.
• Permanently fix the label concerning the manual release adjacent to its actuating member.
• After installing the drive motor, make sure that the mechanism, protective system and all manual manoeuvres operate properly.
• Doors and vertical gates require an anti-fall function or device.
• For drive motors that allow for accessing unprotected moving parts once they have been installed, such parts must be installed 2.5 m above the floor or
other surface form which they can be accessed.
• Make sure to avoid any entanglements due to the opening movement of the driven part.
• After the installation, make sure that the mechanism is correctly adjusted and that the protection system and the manual release device (if present) work
properly.
• The device must be disconnected from the power supply when removing the batteries.
• The batteries must be removed from the device prior to its disposal.
• The batteries must be safely disposed of.
• If the batteries are not rechargeable, do not replace them with rechargeable batteries.
• Looking at LED lights from close up and for prolonged periods can cause dazzling. It may temporarily reduce eyesight and cause accidents. Avoid look-
ing at LEDs directly.
• The manufacturer of this appliance, Nice S.p.A., hereby declares that the product complies with Directive 2014/53/EU. The instruction manual and the
full text of the EU Declaration of Conformity are available at the following Internet address: www.niceforyou.com, under the "support" and "download"
sections.
• For transmitters: 433 MHz: ERP < 10 dBm - 868 MHz: ERP < 14 dBm - 2.4 Ghz: EIRP < 10 dBm.
• For receivers: 433 MHz, 868 MHz.
2 – English
INSTALLATION WARNINGS
BATTERY-OPERATED DEVICES
APPLIANCES WITH LED LIGHT
APPLIANCES WITH RADIO DEVICE