Technical Data; Noise/Vibration Information; Declaration Of Conformity - Berner BACIS BL12V Manual Original

OBJ_BUCH-3430-001.book Page 15 Monday, November 20, 2017 10:37 AM
9 Rotational direction switch
10 On/Off switch
11 Battery charge-control indicator
12 Handle (insulated gripping surface)
13 Double bit*
14 Universal bit holder

Technical Data

Cordless Impact Screwdriver
Art. No.
Rated voltage
No-load speed
– Setting 1
– Setting 2
Impact rate
– Setting 1
– Setting 2
Maximum torque, hard screwdriving application
according to ISO 5393
Bolt size
Max. screw dia.
Tool holder
Weight according to EPTA-Procedure 01:2014
Permitted ambient temperature
– during charging
*
– during operation and during storage
Recommended batteries
Recommended chargers
* limited performance at temperatures <0 °C

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-2.
Typically the A-weighted noise levels of the product
are: Sound pressure level 87 dB(A); Sound power
level 98 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values ah (triax vector sum) and
uncertainty K determined according to
EN 60745-2-2:
Impact tightening of fasteners of the maximum ca-
pacity of the tool: a =10,5 m/s
h
The vibration level given in this information sheet
has been measured in accordance with a standar-
dised test given in EN 60745 and may be used to
compare one tool with another. It may be used for
a preliminary assessment of exposure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with different
accessories or insertion tools or is poorly maintai-
ned, the vibration emission may differ. This may si-
gnificantly increase the exposure level over the to-
tal working period.
1 609 92A 44J • 20.11.17
15 Screwdriver bit*
16 Belt clip
17 Colour clip
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
An estimation of the level of exposure to vibration
should also take into account the times when the
tool is switched off or when it is running but not ac-
tually doing the job. This may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.

Declaration of Conformity

We declare under our sole responsibility that the
2 2
, K=1,5 m/s .
product described under Technical Data is in con-
formity with all relevant provisions of the directives
2011/65/EU, 2014/30/EU, 2006/42/EC including
their amendments and complies with the following
standards:
EN 60745-1:2009+A11:2010
EN 60745-2-2:2010
EN 62471:2008
EN 55014-1:2006+A1:2009+A2:2011
EN 55014-2:1997+A1:2001+A2:2008
EN 50581:2012
V=
min-1
-1
min
-1
min
-1
min
Nm
mm
mm
¼ " hexagon socket
kg
°C
°C
BBP 12V x.xAh, BACP 10,8V Li x.xAh
BBC 12V, BACC 10,8V Li
BACIS BL 12V
343777
12
0 – 1200
0 – 2600
0 – 2700
0 – 3100
110
M4 – M12
8
0.9
0...+45
–20...+50
English | 15