Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5 BATTERY TOOL USE AND CARE
Recharge only with the charger specified
a.
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
b.
Use power tools only with specifically des
ignated battery packs. Use of any other
battery packs may create a risk of injury
and fire.
When battery pack is not in use, keep it
c.
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a con
nection from one terminal to another.
Shorting the battery terminals together
may cause burns or a fire.
d.
Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with wa
ter. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
e.
Do not use a battery pack or tool that is
damaged or modified. Damaged or modi
fied batteries may exhibit unpredictable be
haviour resulting in fire, explosion or risk of
injury.
Do not expose a battery pack or tool to fire
f.
or excessive temperature. Exposure to fire
or temperature above 130 °C (265 °F) may
cause explosion.
Follow all charging instructions and do not
g.
charge the battery pack or tool outside the
temperature range specified in the in
structions. Charging improperly or at tem
peratures outside the specified range may
damage the battery and increase the risk of
fire.
6 SERVICE
a.
Have your power tool serviced by a quali
fied repair person using only identical re
placement parts. This will ensure that the
safety of the power tool is maintained.
Never service damaged battery packs.
b.
Service of battery packs should only be
performed by the manufacturer or author
ized service providers.
Only use original Festool parts for repair
c.
and maintenance. The use of incompatible
accessories or spare parts can result in
electric shocks or other injuries.
Follow the operating manual for the charger
and the battery pack.
3.2
Tool-specific safety instructions for
cordless impact screwdriver
–
Hold the power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring. Autting accessory contact
ing a "live" wire may make exposed metal
parts of the power tool "live" and could give
the operator an electric shock.
Use appropriate detection devices to look
–
for any hidden supply lines or consult your
local utility company. If the insertion tool
makes contact with live cables, it can result
in fire and electric shock. Damage to a gas
pipe can lead to an explosion. Penetration
of a water pipe can result in damage to
property.
–
Wear suitable personal protective equip
ment: Ear protection and safety goggles.
Hold the power tool firmly in your hand.
–
Make sure the speed is adjusted correctly
when screwdriving. Be prepared for high
reaction torque, which can arise when
working with the power tool.
Do not use the power tool in the rain or in
–
damp surroundings. Moisture in the power
tool may cause a short circuit and burning.
Wait until the power tool has come to a
–
complete halt before placing it down. The
insertion tool can get caught and lead to a
loss of control of the power tool.
Avoid unintentional activation. Carrying
–
the electric power tool with your fingers on
the on/off switch can lead to accidents.
If you are not using the power tool, set the
rotational direction switch/safety lock [1-8]
to the centre position to lock the on/off
switch.
–
Do not use power supply units or third-
party battery packs to operate cordless
power tools. Do not use third-party charg
ers to charge the battery packs. The use of
accessories not expressly authorised by the
manufacturer can result in electric shocks
and/or serious accidents.
–
Only use tools and accessories approved
by Festool for this power tool. The use of
non-approved tools or accessories may in
crease the risk of injury and cause serious
ly unbalance the machine. This can worsen
the quality of the working results and in
crease the wear of the machine.
English
5
Tabla de contenido
