Pulsar FORWARD F455S Manual Del Usuario página 10

Cover adapter
model
Cover adapter FN
50mm
Cover adapter FN
56mm
Powering On and Image Setup
•
Remove the lens cover (1) by turning it counterclockwise.
•
Turn on the attachment by pressing the ON (9) button. An image will appear
on the display after a few seconds.
•
If necessary, adjust the reticle sharpness according to the instructions for
your scope.
•
Rotate the lens focus knob (10) to focus on the visual target.
•
Basic settings (brightness and contrast adjustment) can be altered by using
the quick access menu.
•
Enter the quick menu with a short press of the M (7) button.
•
A short press of the M (7) button enables you to switch between functions, as
described below.
- Brightness
changing the display brightness value from 0 to 20.
- Contrast
and changing the display contrast value from 0 to 20.
•
Power the attachment off after use with a long press of the ON
(9) button.
"SumLight™" Function
The SumLight™ function substantially increases the sensitivity of the CMOS
array in the event of a reduction in the light level, thus enabling observation in
conditions of low light without using the IR illuminator.
•
To activate the SumLight™ function, press briefly the LEFT (8) button.
•
Press the LEFT button (8) once more to switch off.
•
The SumLight™ icon (on
7
ENGLISH
The internal diameter of the insert needs to match the
outer diameter of the objective lens housing of the
daylight riflescope it is being installed on.
Insert internal
diameter, mm
51.6
53.4
55
56
57
58
59
60
61
62
63
64
65
– by pressing the RIGHT (6) and LEFT (8) buttons and
– by pressing the RIGHT (6) and LEFT (8) buttons
or off
Suitable for lens housing of daylight
riflescopes with an outer diameter of, mm
51.6
53.4
54.7-55.6
55.7-56.6
56.7-57.6
57.7-58.6
58.7-59.6
59.7-60.6
60.7-61.6
61.7-62.6
62.7-63.6
63.7-64.6
64.7-65.6
) is displayed in the status bar.