Receiving Audio; Dark Mode - Motorola NTN2570 Manual Del Usuario

Button Push
Volume Up
Volume Down
Volume Up and Hold
Volume Down and Hold

RECEIVING AUDIO

Once the wireless device is connected to the two-way radio/
adapter, the radio speaker mutes and the audio is heard only
from the wireless device earpiece. In the event of lost link, or if
wireless device is disconnected, the audio is reverted back to
the two-way radio speaker.

DARK MODE

Dark Mode allows the user to turn off the LEDs on the wireless
device. Placing the wireless device in Dark Mode:
• The wireless device can be put in Dark Mode during power
ON by simultaneously pressing Volume Up and Volume
Down buttons or a Voice Prompt.
• A feedback tone is heard to let the user know the LEDs are
turned off.
• Once the device is turned on, it can be toggled IN and OUT
of Dark Mode by simultaneously pressing Volume Up and
Volume Down for 3 seconds.
• The wireless device will display the LED Indication before it
gets connected to the Radio and will enter Dark Mode 20
seconds after connection is established.
• The wireless device will not show the LED Indication on
Link Lost.
Volume Tone with increased loudness
Volume Tone played with decreased
loudness
Volume Tone played continuously with
increasing loudness
Volume Tone played continuously with
decreasing loudness
Table 4: Volume Indicators
11
Tone Indication
(Audio Device)