Motorola NNTN8127 Manual De Instrucciones

OPERATIONS
CRITICAL
WIRELESS
MOTOROLA, MOTO, MOTOROLA SOLUTIONS
and the Stylized M logo are trademarks or
registered trademarks of Motorola Trademark
Holdings, LLC and are used under license.
All other trademarks are the property
of their respective owners.
© 2011 – 2016 Motorola Solutions, Inc.
All rights reserved.
*68012006090*
68012006090-DA
ASSEMBLY
1. Place the clip horizontally in the
clip track area.
2. Slide the clip upward until a click
is heard.
3. After assembly.
OPERATIONS CRITICAL WIRELESS
Collar Clip
Flower Tip
Recess on
Front Housing
Volume Up
Volume Down
Battery LED
Swivel Clothing Clip
Ear Tube
Power/Multi-Function
Button (MFB)
Waste (disposal) of your Electronic and Electric Equipment
Note: Refer to the Operations Critical Wireless User Guide (68012002053) for
additional waste disposal, detailed product information and multi language leaflet.
PAIRING YOUR AUDIO DEVICE
First time connection steps:
1. Verify that both the host and the wireless device are powered ON. (First time only:
Once the wireless device is powered ON, if not previously selected, the wireless
DISASSEMBLY
1. Rotate the clip 90° (clockwise/anti-
clockwise).
2. Lift up the metal spring and slide
the clip out of the back cover.
3. While lifting the metal spring, slide
the clip out of the back cover with
your thumb.
device will instruct the user to select language or tones, and then it goes into
Pairing Mode automatically.)
2. Both the wireless device and wireless host must be within pairing range
Earpiece
(recommended pairing range is within 1 meter).
Portion
3. After the devices are paired successfully, a ring indication is played on the audio
device.
4. Press the MFB on the wireless device to start connection process.
5. Wireless Link Connected with Host indication is provided upon successful link
establishment (refer to Table 1).
PTT
6. You are now ready to use your wireless device.
Microphone
Table 1:
State
USB and Charger
Not Paired
Ear Strap
Paired Successfully
Wireless Link
Connected with Host
Wireless Link
Disconnected from Host
Wind Screen
PAIRING YOUR REMOTE PTT
First time connection steps:
1. Ensure that device and host are in pairing mode.
2. Both the wireless device and wireless host must be within pairing range.
3. Once the device is successfully connected to host, a connection successful tone
indication is heard on audio device.
Note: Please refer to the host manual to put the host in pairing mode.
SUBSEQUENT CONNECTION
Same host:
If the Bluetooth link is lost, connection will automatically reestablish when the host and
device come within range.
New host:
1. Put the wireless device in Pairing Mode by powering ON while Pressing PTT
Button simultaneously.
2. Follow steps from Pairing Your Audio / Remote PTT Device.
Following wireless device functionalities are Host Dependent: Please refer to the host
manual for detailed information.
• Connecting Multiple Devices: Depending on the host, user may have to connect
the audio device first.
• Volume: Depending on the host, your wireless device may have localized volume
control or volume control that is in sync with the radio.
• Reconnect: The reconnection behavior of the Wireless device depends on the host.
ACOUSTIC SAFETY
Exposure to loud noises from any source for extended periods of time may
temporarily or permanently affect your hearing. The louder the radio's volume, the
less time is required before your hearing could be affected. Hearing damage from loud
noise is sometimes undetectable at first and can have a cumulative effect.
To protect your hearing:
• Use the lowest volume necessary to do your job.
• Turn up the volume only if you are in noisy surroundings.
• Turn down the volume before adding headset or earpiece.
• Limit the amount of time you use headsets or earpieces at high volume.
• When using the radio without a headset or earpiece, do not place the radio's
speaker directly against your ear.
Note: Refer to the Operations Critical Wireless User Guide (68012002053) at http://
www.motorolasolutions.com/content/dam/msi/docs/business/_documents/user_guides/
static_files/operations_critical_wireless_user_guide.pdf for additional safety information.
FM Approved as intrinsically safe as Division 1, Class I, II, II.
Group C, D, E, F, G, T3C.
Printed in the USA
Wireless Link and Pairing Indicators
LED Indication
Tone Indication Voice Prompt
(Audio and
(Audio Device) (Audio Device)
Standalone PTT Device)
Blue LED Blinking Pairing Ready Tone "Searching For
Host"
Blue LED Solid for 2 Pairing Successful –
seconds Tone
Blue LED Heartbeat: Long Connected Tone "Headset
OFF and Short ON Connected"
Blue LED Solid ON Disconnected Tone "Headset
every 2 minutes for Disconnected"
10 minutes
en-US