Changing Supply Cables And Vehicle Cables; Disconnecting Cables - Porsche 9Y0.012.003-ROW Manual De Instrucciones

Changing Supply Cables and Vehicle Cables

Changing Supply Cables and
US
Vehicle Cables
FC
DANGER
Risk of serious or fatal injury from electric shock.
e Before changing the supply cable, always unplug
ESM
the supply cable from the electrical socket and
disconnect the vehicle cable from the vehicle
PTB
charge port.
e Only change cables in a dry environment.
e Only use cables approved by Porsche.
TR
f Refer to chapter "Items Supplied" on page 5.
f Refer to chapter "Selecting a Supply Cable" on
RU
page 7.
In some countries, e.g. in Norway, Italy, Portugal and
UK
1)
Spain , the supply cable must only be changed by a
qualified electrician. Porsche recommends that you
use a certified Porsche service partner.
VIE
1) Time of printing. Further information is available from
your authorized Porsche dealer or your local electricity
HE
supplier.
AR
JPN
KOR
CHS
CHT
THA
8
Electric shock
Fig. 2: Connections on the control unit
The supply cable A is removed and plugged in at the
top of the control unit.
The vehicle cable B is removed and plugged in at the
bottom of the control unit.

Disconnecting cables

Fig. 3: Disconnecting cables
b Charging of the high-voltage battery has ended
and the vehicle plug has been removed from the
vehicle charge port.
b The power plug has been disconnected from the
electrical socket.
1. Remove the screw C using a suitable tool.
2. Lift the lever A.
3. Pull out the plug B until you feel initial resistance.
4. Close the lever A.
5. Pull out the plug B fully.