q
w
EMU00884*
Emergency Starting Engine
1) Remove the top cowling.
2) Remove the start-in-gear protection
3) Remove the start-in-gear protection
e
4) Remove the starter after removing
5) Reinstall two bolts to secure the fuel
5-7
cable 1 and the choke cable 2 from
the holder on the starter.
After removing the choke cable, con-
firm that the cable end is contacted
with the silencer by pushing it inside.
cable end by pulling it out from the
lever of the starter after loosening the
nut 3.
the three bolts.
tank.
GB