Keypad Tone; Proximity Sensor; Brightness; Default Settings - Comelit 3471 Manual Tecnico

2.11 Keypad tone

This function can be used to enable/disable keypad tones.
1. Access programming mode, see page 17.
2. Select: settings/keypad tone.
KEYPAD TONE
*YES
NO
OK
SCROLL
3. Choose between:
YES to enable the function (default).
NO to disable the function.
4. Confirm.

2.12 Proximity sensor

Lighting for entrance panel 3471 is provided by the "LED sun shade"
accessory Art. 3459. The "proximity sensor" function encourages
energy saving by activating the lighting only when the user approaches
the entrance panel.
The sensor can be set to "off", or one of three sensitivity levels which
detect the user at different distances (low sensitivity > user nearby,
high sensitivity > user further away).
1. Access programming mode, see page 17.
2. Select: settings/proximity sensor.
PROXIM. SENSOR
*OFF
LOW SENS.
MED. SENS.
OK
SCROLL
3. Choose between:
off (default)
low
medium
high
When the speaker unit camera is running (during a call or during
self-ignition), the LED sun shade (Art. 3459) lighting is disabled, to
prevent it from interfering with the recording

2.13 Brightness

Lighting for entrance panel 3471 is provided by the "LED sun shade"
accessory Art. 3459.
The LED sun shade consists of a courtesy LED side light (always on)
and several intensity-adjustable LEDs.
LED brightness can be controlled automatically or manually:
• Auto brightness enabled in this mode a sensor detects the light
level in the room and the device provides a suitable amount of light.
The light switches off when the device is in standby.
• Auto brightness disabled in this mode the light intensity must
be set manually (from 0 to 100%) for the enabled status and the
standby status.
1. Access programming mode, see page 17.
2. Select: settings/brightness.
3a. Select YES to enable auto brightness.
3b. Select NO (default) to enable manual brightness.
OK
ESC
4b. Adjust the light intensity (default 20%) for "standby" status using
5b. Adjust the light intensity (default 100%) for "enabled" status using
OK
ESC

2.14 Default settings

This function is used to restore the default settings:
Language = Italiano
Second language = disabled
Type of system = Simplebus
Call mode = standard
Access control= disabled
Welcome message = disabled
Screen saver = disabled
Type of download = disabled
System parameters/RS485 address = 0
Keypad sensitivity = medium
Keypad tone = disabled
Proximity sensor = off
Auto brightness = NO
1. Access programming mode, see page 17.
2. Select: settings/default settings.
3. Choose between:
4. Confirm.
AUTO BRIGHTNESS
*YES
NO
OK
SCROLL
Or:
When the speaker unit camera is running (during a call or during
self-ignition), the LED sun shade (Art. 3459) lighting is disabled, to
prevent it from interfering with the recording
STANDBY INTENS.:
020
SCROLL
ESC
and confirm.
ACTIVE INTENS.:
100
SCROLL
ESC
and confirm.
standby intensity = 20
enabled intensity = 100
YES
NO
This procedure resets the directory database and the password
and key database
OK
ESC
OK
CANC
OK
CANC
27