Voice Messages - Comelit 3471 Manual Tecnico

2.2.1.5.3 S SERIAL
A) ACTUATOR FUNCTION
Allows enabling/disabling of the actuator function on the
S serial line
1. Access programming mode, see page 17.
2. Select: settings/system parameters/speaker parameters/
advanced options/S serial/actuator function.
3. Choose between:
YES
NO
4. Confirm.

2.2.1.5.4 VOICE MESSAGES

Allows enabling/disabling of voice and visual messages
on the speaker module
1. Access programming mode, see page 17.
2. Select: settings/system parameters/speaker parameters/
advanced options/voice messages.
3. Select a language to enable voice and visual messages on
the speaker module, or select OFF to disable voice and visual
messages on the speaker module.
SELECT LANGUAGE
*OFF
ITALIANO
FRANCAIS
OK
SCROLL
4. Confirm.
2.2.1.5.5 CALL
A) TRIPLE CALL
Allows enabling/disabling of the triple call function
1. Access programming mode, see page 17.
2. Select: settings/system parameters/speaker parameters/
advanced options/call/triple call.
3. Choose between:
YES
NO (default)
4. Confirm.
B) CONFIRMATION TONE
Allows enabling/disabling of the the call confirmation
tone
1. Access programming mode, see page 17.
2. Select: settings/system parameters/speaker parameters/
advanced options/call/confirmation tone.
3. Choose between:
YES (default)
NO
4. Confirm.
C) CODES BOOSTER
Allows enabling/disabling of the call codes booster
1. Access programming mode, see page 17.
2. Select: settings/system parameters/speaker parameters/
advanced options/call/codes booster.
3. Choose between:
YES
NO (default)
4. Confirm.
C) ANSWER WAIT TIME
Allows setting of the call answer wait time
1. Access programming mode, see page 17.
2. Select: settings/system parameters/speaker parameters/
advanced options/call/answer wait time.
3. Enter the value in seconds.
OK
ESC
VALUE IN SECS
10
SCROLL
ESC
4. Confirm.
D) VIEW
Allows viewing of the speaker module call parameters
1. Access programming mode, see page 17.
2. Select: settings/system parameters/speaker parameters/
advanced options/call/view.
» Reproduces the speaker module call parameters
TRIPLE CALL
CONFIRMATION TONE
CODES BOOSTER
ANSWER WAIT TIME
2.2.1.5.6 SELF IGNITION
Allows enabling/disabling of self-ignition
1. Access programming mode, see page 17.
2. Select: settings/system parameters/speaker parameters/
advanced options/call/self ignition.
3. Choose between:
YES (default)
NO
4. Confirm.
2.2.1.5.7 DEFAULT SETTINGS
Used to restore the default settings:
De-misting heating element = disabled
Audio-visual messages = disabled
Door lock command on SE in AC
Door lock time = 2 sec + tone disabled
C.NC.NO relay in parallel with SE
Door lock-release always enabled
Actuator function on S serial line = disabled
Answer wait time = 60 sec
Conversation time = 90 sec
Self-ignition = enabled
Confirmation tone on user call = enabled
Reset wait time = 10 sec
Send call = single
Control of internal units connected to speaker module = up to 70
System mode = Simplebus
1. Access programming mode, see page 17.
2. Select: settings/system parameters/speaker parameters/
advanced options/default settings.
3. Choose between:
YES
NO
4. Confirm.
OK
CANC
60
23