Self-Testing; Setting The Language; Setting The Type Of Download; Programming Menu - Comelit 3471 Manual Tecnico

Self-testing

On power-up, the device runs a diagnostic test of the connections to
check for correct speaker module communication and configuration.
The message PLEASE WAIT indicates self-testing in progress.
On completion of self-testing, press the
standby.
The word OK should appear next to the menu items with the name
SIMPLEBUS or SIMPLEBUS TOP at the bottom of the screen
depending on the configuration of the speaker module and the
directory module.
INITIALIZING
NAMES STORED
PASSWORD
KEYS
SPEAK. SERIAL
SIMPLEBUS

Setting the language

When you switch the system on, you will be asked to select the
desired language (default = Italian).
1. Scroll through the list using
2. Press
or to confirm.
SELECT LANGUAGE
ITALIANO
*ENGLISH
FRANCAIS
OK
SCROLL
3. Press
to exit.

Setting the type of download

In SIMPLEBUS/SIMPLEBUS TOP mode and with USB connected: when
you switch the system on, you will be asked to select the type of download.
1. Scroll through the list using
2. Press
or to confirm.
TYPE OF DOWNLOAD
*OFF
USB
RS485
OK
SCROLL
3. Press
to exit.
For downloading in RS485 mode, see diagram on page 100.
To avoid malfunctions: during download in USB mode, the
keypad must not be powered by an external source

Programming menu

From the programming menu you can:
• manage the entry, editing and deletion of names, codes,
passwords, keys and supercodes;
• change the settings (type of download, system parameters,
language, second language, call management...);
• view information on the device.
18 18
key to put the module in
OK
OK
OK
OK
OK
.
OK
ESC
.
OK
ESC

Accessing the programming menu

„ Move CV2 and power up the module.
or:
1. Press
.
2. Enter the supercode (default 778899).
ENTER PASSWORD:
OK
3. Press to confirm.

DATA MANAGEMENT

SETTINGS
INFO
OK
SCROLL
1. Data management
Before storing data in the directory, we recommend selecting:
• the call management mode, see "2.5 Call management"
• the access control mode you wish to adopt, see "2.6 Access
control".
Data entry and changes can be managed externally using
software 1249B (R.I. 003 - SW rev. 2.3 or higher).

1.1. Names

1.1.1 ENTER NAMES

not available if the call mode is IMMOTEC STANDARD or
IMMOTEC INDIRECT (see section 2.5)
"Enter names" can be used to enter names and all the data
associated with them (call code, indirect code, password, RFID
key).
1. Access programming mode, see page 17.
2. Select data management/names/enter names by pressing
or
to confirm.
3. Enter the name.
MARIO ROSS_
ESC
***** 9
CANC
OK
ESC
OK
CANC