Atlas Copco G2420 Manual De Producto página 17

G2420
Assembling the wheel cover
1. Apply a few drops of high strength threadlocker to the screw (12) and at-
tach the stopper (11) to the wheel cover (15).
2. Insert the slide shafts (10) into the wheel cover (15) and attach them with
the pins (13).
3. Put the stopper spring (5) and the stopper (4) into the arm holder (6) and
attach them with the roll pin (3).
4. Insert the slide springs (9) into the slide shafts (10) and attach the stopper
spring assembly to the wheel cover with the spring pin (8).
5. Do a stopper function test.
6. Set the arm spring (7) in the slide spring assembly (6) and attach the ten-
sion arm assembly with the adjust screw (1).
7. Attach the wheel cover lid (24) to the wheel cover (15) with the pin (23),
the spring (22), the washer (21) and the e-ring (20).
8. Attach the apron (25) to the wheel cover (15) and the wheel cover lid (24)
by using one drop of Aron Alpha.
EN
© Atlas Copco Industrial Technique AB - 9839 0458 00
Service
17