Assembly Without One Sleeve - WillowWood One Manual De Instrucciones

ASSEMBLY WITHOUT ONE SLEEVE

Use this method only when assembling the flexible
socket to the laminated socket for shipment or storage.
For delivery to the patient, refer to page 15.
1. Insert the flexible socket into the laminated socket,
aligning the hole on the flexible socket with the
One Link hole on the laminated socket.
2. Insert the flange bolt through the flexible socket
and One Link hole.
3. Using a 7 mm socket, install the One Link Nut onto
the flange bolt.
Sand down the flange bolt if necessary so that it is
flush with the One Link Nut.
Hole in flexible socket lined up with hole in laminated socket
17