Identification Plate; Technical Data And Overall Dimensions - Rivacold CO2NNEXT Instrucciones Para El Ensamblaje

3.1.1. Identification plate

EN
To identify the partly completed machine, a specific CE plate has been affixed onto it; the
identification data reported on this plate must be notified to the offices of the Manufacturer upon
each request for its intervention or when ordering spare parts. More specifically, the following data
are reported on the identification plate:
1. Partly completed machinery code
2. Power supply voltage
3. Max working pressure (high pressure)
4. Max working temperature (high pressure)
5. Serial number / Matricola
6. Compressor
7. Horsepower
8. Max working pressure (low pressure)
9. Max working temperature (low pressure)
10. Refrigerant types
Identification of matricola / serial number:
Digits 1 and 2 = the last two digits of the year of manufacture;
Digits 3 and 4 = week of the year in which the partly completed machinery was manufactured;
Digits 5, 6, 7, and 8 = sequential number.

3.1.2. Technical data and Overall dimensions

All units are supplied with the circuit pressurised with nitrogen. Refer to the annexed electrical and
refrigerant circuit diagrams for technical data.
On or more evaporators can be connected to each condensing unit, on the condition that the
prescriptions imposed by HVAC technology; in any event, the individual components must be
selected carefully.
The generic refrigerant circuit diagram of the evaporator section is shown below.
52 / 168
Co2Nnext
Key to symbols:
EV = Evaporator
VT = thermostatic valve
S = Siphon
rev.00