General Warnings And Behavioural Norms - Rivacold CO2NNEXT Instrucciones Para El Ensamblaje

General Warnings and Behavioural Norms

EN
In order to avoid any condition of risk to persons or of damages to the partly completed machinery, we
recommend that you diligently follow the general warnings and behavioural norms reported herein.
DANGER: the Manufacturer rejects any responsibility for possible damages to things
and/or persons stemming from improper interventions performed by unqualified,
untrained, or unauthorized personnel.
 The operators appointed to manage the partly completed machinery must be duly
instructed on how to best use it risk-free, and must operate in a comfortable environment
that may ensure the best conditions of safety and hygiene possible.

Before using the partly completed machinery, make sure that any condition dangerous to
safety has been duly eliminated and that there are no operators in the dangerous areas
near the partly completed machinery itself.
 Before using the partly completed machinery, make sure that all the guards or other
protections are in their place and that all the safety devices are present and efficient.
 Carefully read the labels on the partly completed machinery, do not cover them for any
reason, and immediately replace them if they get damaged.

Do not lay liquid containers on the partly completed machinery.
 Consult these instructions with regard to the safety provision in force and to the specific PPE
to be adopted for personal safety; more specifically, at any rate, the personnel appointed
to the partly completed machinery must wear suitable clothing avoiding or pay the
necessary attention to:
o
o
o
o

The personnel appointed to maintenance on the partly completed machinery must be
knowledgeable of all the procedures described in Chapter 5 - Maintenance and
Demolition and have adequate technical preparation to correctly interpret the instructions
and annexed diagrams and to intervene on the partly completed machinery.

The area where the maintenance operations are performed must always be clean, dry,
and with suitable equipment always available and efficient.
 If work must be performed in the proximity of electrical components ensure your hands are
completely dry and wear dielectric gloves.
DANGER: It is necessary to make sure that before starting any type of intervention on
the partly completed machinery or near its components or accessory equipment,
the power supply be cut-off; if this were not possible, it is necessary to take measures
that, at any rate, allow operators to safely work near the partly completed
machinery.
DANGER: Release of refrigerant gas due to tripping of the pressure relieve valve can
harm persons and/or property.
DANGER: Unauthorized tampering with or replacement of one or more parts of the
partly completed machinery and the use of accessories, tools, and consumption
materials different than those indicated by the Manufacturer may cause danger of
injury.
CAUTION: All the materials with an environmental impact which need to be
eliminated following maintenance interventions must be disposed of in accordance
with the norms in force. If necessary, contract out disposal procedures to a
specialised company.
50 / 168
flapping clothing,
loose sleeves,
dangling neckties or scarves,
necklaces, bracelets, and rings.
Co2Nnext rev.00