Risk To Breathing; Risk From Moving Parts; Hot Surfaces - DeWalt D55270 Manual De Instrucciones

Store flammable materials in a secure location away
from compressor.
Restricting any of the compressor ventilation
openings will cause serious overheating and could
cause fire. Never place objects against or on top of
compressor. Operate compressor in an open area at
least 3 feet away from any wall or obstruction that
would restrict the flow of fresh air to the ventilation openings.
RISK FROM FLYING OBJECTS
The compressed air stream can cause soft tissue damage to exposed
skin and can propel dirt, chips, loose particles and small objects at high
speed, resulting in serious injury. Always wear ANSI Z28.1 approved
safety glasses with side shields when using the compressor. Never
direct air stream at people or animals. Use only OSHA approved air
blow guns.

RISK TO BREATHING

The compressed air from your compressor is not safe for
breathing! The air stream may contain carbon monoxide,
toxic vapors or solid particles. Never inhale air from the
compressor either directly or from a breathing device
connected to the compressor.
Sprayed materials such as paint, paint solvents, paint
remover, insecticides, weed killers, etc. contain harmful vapors and
poisons. NOTE: Operate air compressor only in a well ventilated area.
Read and follow the safety instructions provided on the label or safety
data sheets for the material you are spraying. Use a NIOSH/MSHA
approved respirator designed for use with the specific application.

RISK FROM MOVING PARTS

The compressor is designed to run continuously.
Always turn off the compressor, bleed pressure from
the air hose and tank, and disconnect from power
source before performing maintenance or attaching
tools and accessories.

HOT SURFACES

GASOLINE
ENGINE
ENGINE
MUFFLER
HOT SURFACES
ENGINE
MUFFLER
ENGINE
HEAD
Keep your hair, clothing, and gloves away from moving parts. Loose
clothes, jewelry, or long hair can be caught in moving parts. Air vents
may cover moving parts and should be avoided as well. Do not
remove the protective covers from this product. Never operate
compressor with guards or protective covers that are damaged or
removed. Never stand on the compressor.
HOT SURFACES
Touching exposed metal such as the compressor head or aftercooler
can result in serious burns. Never touch any exposed metal parts on
3
AFTERCOOLER
COMPRESSOR
CYLINDER & HEAD
PUMP
CRANKCASE
COMPRESSOR
CYLINDER & HEAD
AFTERCOOLER
PUMP
CRANKCASE