Special Functions; Guarantee - Clatronic MWG 739 H Instrucciones De Servicio/Garantía

5....-05-MWG 739 01.08.2004

Special Functions

GB
Automatic Start:
You can start the microwave or a Grill/Combi or Hot Air/Combi
setting at a predefined time.
In order to do so, please set the time first.
To start the microwave automatically, please proceed as follo-
ws:
1. Press the PAUSE/ABBRUCH button.
2. Select the desired microwave power by pressing the
LEISTUNG button once or repeatedly.
3. Use the arrow keys to select the desired cooking time.
4. Press the UHR button for more than 2 seconds. A signal is
heard and the display changes to the current time. The first
figure flashes.
5. Using the arrow buttons and the UHR button, please enter
the desired starting time.
For example: 12:30 min. cooking time at 100% power, starting
time 14:20
Step
1
2
3
4
5
6
6. Press the UHR button again. A longer signal is heard and
the letter "M" appears in the display.
If you would like to see the starting time again, press the UHR
button.
The microwave switches on at the preset time.
Warning, danger of fire! The device must not be left unatten-
ded during operation. When setting a delayed cooking time, al-
ways set the time such that the device is not left unattended
during operation.
Do not operate the microwave when it is empty. If you need to
remove the food that is being cooked before the planned time,
the programme has to be cancelled using the
PAUSE/ABBRUCH button.
After the time has elapsed the device switches off and the
word END appears in the display. Then remove the food.
Automatic Reminder:
After cooking has finished you are reminded every 2 minutes by
a beep to remove the food.
This reminder is switched off by opening the door or pressing the
PAUSE/ABBRUCH button.
Disabling:
Press the PAUSE/ABBRUCH button for more than 2 seconds to
disable the machine. The fact that the machine is disabled is then
shown in the display. The function of the operating controls is
now blocked. Press the PAUSE/ABBRUCH button again for
more than 2 seconds to reactivate the machine.
30
16:10 Uhr Seite 30
All manuals and user guides at all-guides.com
Button Display
PAUSE/ABBRUCH
LEISTUNG 10 0P
/ 12:30
UHR 10:00
/ 14:20
UHR 14:20
Error Messages
During operation "Err0" or "Err1" appears in the display.
In this case there is a problem with the electronic control
system.
Please return the device to our service centre with a descripti-
on of the error.
Cleaning
Always remove the mains plug before cleaning the machine.
• Clean the inside of the oven after use with a slightly damp
cloth.
• Please clean the microwave from the outside with a slight-
ly damp cloth.
• Clean the accessories in the usual manner in soapy water.
• The door frame/door seal and neighbouring parts must be
carefully cleaned when dirty with a damp cloth.
This device has been tested according to all relevant current CE
guidelines, such as electromagnetic compatibility and low volta-
ge directives, and has been constructed in accordance with the
latest safety regulations.
Subject to technical changes without prior notice!

Guarantee

The device supplied by our Company is covered by a 24 month
guarantee starting on the date of purchase (receipt).
During the life of the guarantee any fault of the device or its ac-
cessories *) ascribable to material or manufacturing defects will
be eliminated free of charge by repairing or, at our discretion, by
replacing it. The guarantee services do not entail an extension of
the life of the guarantee nor do they give rise to any right to a
new guarantee!
Proof of the guarantee is provided by the proof of purchase.
Without proof of purchase no free replacement or repair will be
carried out.
If you wish to make a claim under the guarantee please return
the entire machine in the original packaging to your dealer
together with the receipt.
*) Damage to accessories does not mean automatic free repla-
cement of the whole machine. In such cases please contact our
hotline. Broken glass or breakage of plastic parts are always
subject to a charge.
Defects to consumables or parts subject to wearing (e.g. motor
pistons, kneading blades, drive shafts, spare remote control,
spare toothbrushes, saw blades, etc.) as well as cleaning, main-
tenance or the replacement of said parts are not covered by the
guarantee and hence are to be paid!
The guarantee lapses in case of unauthorized tampering.
After the expiry of the
guarantee
After the expiry of the guarantee repairs can be carried by the
competent dealer or repair service against the payment of the
ensuing costs.