Disposal; Materials; Consumables; Packaging - Abicor Binzel FES-200 W3 Instrucciones De Servicio

FES-200 W3
3 Slide the full dust collecting drawer (8) into the delivered dust collecting bag.
4 Close the dust collecting bag tightly.
5 Unscrew the fastening screws (3) from the cover and lift it off.
6 Place the cover on fume extraction system.
7 Place the dust collecting bag completely over the filter cartridge.
8 Loosen the filter cartridge (5) by turning it to the left (counter-clockwise direction).
9 Remove the filter cartridge (5) and slide it completely into the dust collecting bag.
10Close the dust collecting bag tightly.
11 Package the fume extraction system in an appropriate way. In doing so, observe the local regulations.
12 Dispose of the dust collecting bag and the fume extraction system according to the local regulations.
 12 Disposal on page EN-21

12 Disposal

For the product to be properly disposed of, it first must be dismounted. Please take note of the following
information:
 11 Dismounting on page EN-20

12.1 Materials

This product is mainly made of metallic materials which can be melted in steel and iron works and are, thus,
almost infinitely recyclable. The plastic materials used are marked in preparation for sorting and separation of the materials for later recycling.

12.2 Consumables

Oil, greases and cleaning agents must not contaminate the ground or enter sewage systems. These materials
must be stored, transported and disposed of in suitable containers. Observe the relevant local regulations
and disposal instructions of the safety data sheets specified by the manufacturer of the consumables.
Contaminated cleaning tools (brushes, rags, etc.) must also be disposed of in accordance with the
information provided by the manufacturer of the consumables.
The disposal of dust collecting bags and disposal bags is subject to special waste regulations. The dust must
not enter sewage systems or be disposed of together with normal household waste. Please observe the local
and official regulations.

12.3 Packaging

ABICOR BINZEL has reduced the packaging for shipping to a minimum. Packaging materials are always
selected with regard to their possible recycling ability.
12 Disposal
EN - 21