English
1
► Open the side discharge shield (1) and hold it in position.
► Swing the chute (2) upwards and lift it away.
► Close the side discharge shield (1).
7.5
Fitting and Removing the Blade
7.5.1
Mounting the Blade
► Switch off the mower, remove the activation key and
battery.
► Stand the mower on end.
1
2
► Fit washer (1) on the screw (2).
► Coat screw (2) with Loctite 243 or Loctite 242.
► Fit the blade (3) so that the lugs on the mounting face (4)
engage the recesses in the blade.
16
2
3
3
2
4
► Fit the screw (2) together with the washer (1).
► Use a piece of wood (4) to block the blade (3).
► Tighten down the screw (2) firmly.
7.5.2
Removing the Blade
► Switch off the mower, remove the activation key and
battery.
► Stand the mower on end.
1
2
► Use a piece of wood (2) to block the blade (1).
► Take out the screw (3).
► Remove the washer (4).
► Remove the blade (1).
7 Assembling the Lawn Mower
1
4
3
0458-819-9921-A