Complete The Installation - Kohler K-13680 Manual Del Usuario

Eye
Subassembly
Wire
Connection
from Valve
Assembly

6. Complete the Installation

Reconnect the eye sub-assembly wires.
Using the three long screws, attach the eye sub-assembly to the
wall-mount box. Tighten the screws until the eye sub-assembly is
firmly seated against the finished wall.
Place the lens cover over the eye sub-assembly. Hang the top
edge of the cover plate over the eye sub-assembly. Make sure the
lens cover is held between the cover plate and the eye
sub-assembly.
Pivot the bottom of cover plate down and align the bottom holes
in the cover plate with the holes in the eye sub-assembly. Secure
with the two small hex head screws.
111769-2-AB 10
Cover
Plate
Hex Screw
Kohler Co.