Bang & Olufsen BeoVision MX 4200 Manual Del Usuario página 3

#1 Introduction
#2 Repair of BeoVision MX 4200
#3 Fault fl ow chart
#4 Removal of the cloth front
#5 Removal of the contrast screen and cleaning the television
#6 Adjustments after replacement of main chassis
#7 Check after replacement of main chassis or modules
#8 Service Mode and Flash-programming
9.1 Service mode
10.1 Illustrations
11.1 Replacement of main chassis
12.1 Replacement of other modules
13.1 Overview of geometry parameter settings
14.1 Survey of modules
Survey of symbols:
Make a shortcircuit between the marked points, usually for discharging
e.g. a picture tube
Push with fi nger, in arrow direction
Disconnect internal plug
Connect internal plug
Disconnect mains plug
Connect mains plug
Disconnect aeriel or other external plug
Connect aeriel or other external plug
Loosen/remove or fasten/install screw
Dashed arrow. Push/pull e.g. PCB, chassis etc. in arrow's direction
Filled arrow. Refer to page/chapter for more information, e.g. 12.4 PCB51,
if mounted:
Turn to 12.4 PCB51 and remove or install PCB if such is mounted
Contents, English 2.1