Preparation of the soup now takes place automati-
cally. The appliance heats and mixes at regular
intervals.
As soon as the preparation process is complete,
the appliance will stop automatically. The signal
tone will sound 10 times and the LEDs will fl ash.
TIPS
GB
►
You can stop the preparation process at any
MT
time by pressing the ENC/APAG button e
or by repeatedly pressing the button of the
selected programme. The control lamp then
goes off and the appliance switches itself off .
►
If you want refi ne your meals by adding milk,
cream, fl our, starch or similar ingredients, do
not add these until the preparation process
is complete. Then you can mix everything
quickly by pressing the PULSAR button t.
Otherwise, these ingredients could burn.
TIP
►
For simple preparation of a fruit compote:
add water up to the MÍNIMO/0,3 Litros
marking in the blender jug 3. Add peeled
and chopped fruits (for example, apples or
pears). Select the desired soup function.
Preparing smoothies/milk shakes/
crèmes
1) Insert the plug into a mains power socket.
The appliance emits an acoustic signal.
2) Add all the ingredients into the blender jug 3.
Take care not to exceed the MÁXIMO/1.7
Litros marking.
3) Press the ENC/APAG button e. The appli-
ance emits an acoustic signal. All control lamps
fl ash.
4) Press the MEZCLAR button z. Two signal tones
will confi rm your selection and the correspond-
ing signal lamp will fl ash.
36
The blending process starts and runs through several
phases. After 3 minutes, the blending process is
complete and the appliance stops. The signal tone
sounds 10 times.
NOTE
►
You can stop the preparation process at any
time by pressing the ENC/APAG button e
or by repeatedly pressing the button of the
selected programme. The control lamp then
goes off and the appliance switches itself off .
Preparing vegetable puree
1) Insert the plug into a mains power socket.
The appliance emits an acoustic signal.
2) Add the cooked vegetables to the blender jug 3.
Take care not to exceed the MÁXIMO/1.7 Litros
marking.
3) Press the ENC/APAG button e. The appliance
emits an acoustic signal. All control lamps fl ash.
4) Press the MEZCLAR button z. Two signal tones
will confi rm your selection and the correspond-
ing signal lamp will fl ash.
The blending process starts and runs through several
phases. After 3 minutes, the blending process is
complete and the appliance stops. The signal tone
sounds 10 times.
NOTE
►
You can stop the preparation process at any
time by pressing the ENC/APAG button e
or by repeatedly pressing the button of the
selected programme. The control lamp then
goes off and the appliance switches itself off .
SSK 300 A1