Operating Modes; Led Information Panel - Mennekes AMTRON Compact 3,7/11 C2 Manual De Instrucciones

3.4 Operating modes

The device has various operating modes.
The operating mode depends on the configuration of the device.
Î "Fig. 9: Configure"
The following operating modes are possible:
„ "Permanent authorisation": No authorisation required. All users can charge.
„ "Permanent authorisation with load management": A reduction in the charging current is made possible with the con-
nection of an external potential-free switching contact.
„ "External authorisation": Authorisation is made possible with the connection of an external potential-free switching contact.

3.5 LED information panel

The LED information panel indicates the operating status of the device. Standby, charging, wait time, and fault(s) are indi-
cated by four symbols in the colours blue, green, white, and red.
Symbol Colour
Lit blue
Flashes blue
Lit green
Pulsating green
Steady white
Flashes white
Lit red or flash-
ing red
The colours green and blue can be configured when the device is commissioned.
Î "6.1.2 Set Colour Scheme"
8
Operating mode
"Permanent Authorisation"
Standby
The device is ready for use. No vehicle is connected to the device.
After 12 minutes in the operating status Standby, the energy saving mode is activated and
the blue LED turns off. When the vehicle is plugged in, the Standby mode is reactivated.
-
Charging
Charging in progress.
Charging: vehicle paused
All requirements for charging are met. The charging process is paused due to vehicle
feedback or was terminated by the vehicle.
Wait time
Waiting for the vehicle to end or pause the charging process.
-
Fault
A fault prevents the vehicle from being charged.
Î"9 Troubleshooting"
Operating mode
"Permanent Authorisation
with Load Management"
Standby: charging with 0 A
The charging process is
stopped.
Wait time: charging with 0 A
Charging process paused.
Operating mode "External
Authorisation"
Standby: start charging
The authorisation process is
complete.
f Connect the vehicle to the
device.
Wait time: Removing the
charging cable
The charging process has
finished.
f Remove the charging
cable.