Tabla de contenido
Idiomas disponibles
Idiomas disponibles
24
English
5 Holding the handle upside down, press the shaft down on a hard
surface. If the internal components do not easily release from the
housing, repeat step 3 until the internal components are released.
6 Wedge the screwdriver between the battery and the black frame at the
bottom of the internal components. Then pry the screwdriver away
from the battery to break the bottom of the black frame.
7 Insert the screwdriver between the bottom of the battery and the black
frame to break the metal tab connecting the battery to the green
printed circuit board. This will release the bottom end of the battery
from the frame.
8 Grab the battery and pull it away from the internal components to
break the second metal battery tab.
Caution: Be aware of the sharp edges of the battery tabs to avoid
injury to your fingers.
Tabla de contenido
