Grunninnstilling, Oppsett - SICK LCU-P Manual De Instrucciones

Kapittel 7
Programoppkalling
100 Select Function
Change Set.-up Define User Modes
ENTER
S1 Language
French
English
S2 Measurement Units
Inches
S3 Receiver 1/2
Type 4/none Type 4/Type 4
Type 2/none Type 2/Type 2
S4 Receiver 2 Restart
With Receiver
S5 Reset Switch
Press and release
S6 Alternate Restart Break
Alternate Restart - no
S7 Restart Timer Break
Restart timer
Break - none
Cycle Contact Time Break
S8
Cycle I/O limited
S9 Sensor Test
PSSD not tested
S10
532
8 008 364/NB 86/25-04-00 © SICK AG • Sikkerhetsteknikk • Tyskland • Med forbehold om alle rettigheter
Programmering
7. 2 Grunninnstillinger, Set up
Run Modes
ESC
German
Millimetres
Type 4/Type 2
Type 2/Type 4
Restart Interlock
Latched
Alternate Restart - yes
Restart timer
Break - 28 s
Cycle I/O unlimited
PSSD tested on
I/O Break
S10 System Test
Test Contact N.C.
S11 Relay/Monitor
Relay Monitor - yes
S12 Auxiliary Inputs
No muting Mute = A1 & A2
Muted Inputs
S13
No muted receivers
Muting Timer
S14
No muting timer
S15 New Access Code
No
S16
1234567890<>#
S17
Confirm Set-up
Med
anvisning av
alle basis-
innstillinger
100 Select Function
Change Set-up Define User Mode
ESC
S1 U1, (2), (3)
000 Keypad Enabled
Bruk velgebryter
LCU driftsklar
Bruksanvisning
S9
Test Contact N.O.
Relay Monitor - no
Mute = A1 & A2
or B1 & B2
Receiver 1 Receiver 2
Both Receivers
Velg tid med
0 ... 300 s
Mut. limit s
Yes
Fastlegg 3st.
kodetall. Bekreftelse
* * *
ved valg av #-tegnet
og bekreftelse
ENTER
ENTER (save)
Run Mode
R1
LCU-P