Chicago Pneumatic RX 2 Instrucciones De Operación Y Seguridad página 9

RX 2, 3, 4, 6, 8
► Select, maintain and replace consumables/
inserted tools/ other accessory as recommended
in the operating and safety instructions. Incorrect
selection or lack of maintenance of consumables/
inserted tools/ other accessories may cause an
unnecessary increase in dust or fumes.
Wear washable or disposable protective clothes
►
at the worksite, and shower and change into clean
clothes before leaving the worksite to reduce
exposure of dust and fumes to yourself, other
persons, cars, homes, and other areas.
Avoid eating, drinking, and using tobacco
►
products in areas where there is dust or fumes.
Wash your hands and face thoroughly as soon as
►
possible upon leaving the exposure area, and
always before eating, drinking, using tobacco
products, or making contact with other persons.
Comply with all applicable laws and regulations,
►
including occupational health and safety
regulations.
► Participate in air monitoring, medical examination
programs, and health and safety training programs provided by your employer or trade
organizations and in accordance with
occupational health and safety regulations and
recommendations. Consult with physicians
experienced with relevant occupational medicine.
► Work with your employer and trade organization
to reduce dust and fume exposure at the worksite
and to reduce the risks. Effective health and safety
programs, policies and procedures for protecting
workers and others against harmful exposure to
dust and fumes should be established and
implemented based on advice from health and
safety experts. Consult with experts.
WARNING Electric shock
The hydraulic breaker is not insulated against electric
current. Should the hydraulic breaker come in
contact with electric circuits or other electrical power
sources, there is a risk of severe injury or death.
Never work in the proximity of electric circuits or
►
other electrical power sources.
Make sure there are no hidden electric circuits in
►
your working area.
9800 1050 90 | Original instructions
Safety and operating instructions
WARNING Projectiles
Failure of the work piece, of accessories, or even of
the hydraulic breaker itself may generate high
velocity projectiles. During breaking, splinters, or
other particles may become projectiles and cause
bodily injury by striking the operator or other
persons. Also, breakage of the work piece,
accessories, or the insertion tool may generate high
velocity projectiles that can cause bodily injury. In
addition, objects falling from a height can cause
bodily injury. To reduce risks:
Close off the working area.
►
Before starting, make sure that no persons are in
►
the danger area, 20 meters both horisontally and
vertically from the hydraulic breaker.
Immediately switch off the hydraulic breaker when
►
persons are present in the danger area.
Press the insertion tool against the working
►
surface before you start.
Never operate unless the inserted tool is retained
►
in the hydraulic breaker with a proper tool
retainer.
WARNING Noise hazard
High noise levels can cause permanent and disabling
hearing loss and other problems such as tinnitus
(ringing, buzzing, whistling or humming in the ears).
To reduce risk and prevent an unnecessary increase
in noise levels:
Risk assessment of these hazards and
►
implementation of appropriate controls is
essential.
Operate and maintain the machine as
►
recommended in these instructions.
► Select, maintain and replace the insertion tool as
recommended in these instructions.
If the machine has a muffler, check that it is in
►
place and in good working condition.
Always use hearing protection.
►
Use damping material to prevent work pieces
►
from "ringing".
9