Chicago Pneumatic RX 2 Instrucciones De Operación Y Seguridad página 18

Safety and operating instructions
♦ Direct the hydraulic breaker in a position 90°
towards the object.
Start near the edge and work your way in towards
♦
the middle. Never start in the middle of large
objects.
♦ Never run the hydraulic breaker longer then 15
seconds on the same spot. Move the inserted tool
to a new position if the object does not break.
18
♦ Never bend with the insertion tool.
♦ Use the correct feed pressure. When the feed
pressure is correct the hydraulic breaker is working
at its best and the vibrations are at a minimum.
Also the wear on the bushing and inserted tool is
kept to a minimum.
Listen to the sound from the hydraulic breaker.
♦
The sound changes if there is any bending
between the inserted tool and bushing.
♦ Never run the breaker with the boom cylinders at
their end positions. It may cause damage to the
carrier.
9800 1050 90 | Original instructions
RX 2, 3, 4, 6, 8