Maintenance, Precautions; Storage, Precautions - Chicago Pneumatic RX 2 Instrucciones De Operación Y Seguridad

Safety and operating instructions

Maintenance, precautions

WARNING Involuntary start
An involuntary start of the hydraulic breaker can lead
to severe injuries.
Follow the instructions in the carrier manual to
►
prevent involuntary start of the hydraulic breaker.
Installation of a start circuit on the hydraulic
►
breaker must be made in a way that avoids any
unintentional starts.
A foot pedal on the carrier must be equipped with
►
a protection cover.
WARNING Hydraulic system under high
pressure
Maintenance work on a hydraulic breaker under
pressure can lead to severe injuries. Connections
can loosen suddenly, parts can suddenly move and
hydraulic oil can be ejected.
Depressurise the hydraulic system before
►
performing maintenance on the hydraulic breaker
or the carrier.
WARNING Machine modification
Any machine modification may result in bodily
injuries to yourself or others.
Never modify the machine. Modified machines
►
are not covered by warranty or product liability.
Always use original parts, insertion tools, and
►
accessories.
Change damaged parts immediately.
►
Replace worn components in good time.
►
CAUTION Hot insertion tool
The tip of the insertion tool can become hot and
sharp when used. Touching it can lead to burns and
cuts.
Never touch a hot or sharp insertion tool.
►
► Wait until the insertion tool has cooled down
before carrying out maintenance work.
WARNING Insertion tool hazards
Accidental engagement of the start and stop device
during maintenance or installation can cause serious
injuries, when the power source is connected.
Never inspect, clean, install, or remove the
►
insertion tool while the power source is
connected.
10

Storage, precautions

WARNING Hydraulic breaker and
insertion tool are heavy
► Store the hydraulic breaker and the insertion tool
so that falling or rolling down is prevented.
9800 1050 90 | Original instructions
RX 2, 3, 4, 6, 8