Navigating Through The Menu; Main Menu List - Mitsubishi Electric PAR-33MAA Operación Manual

Navigating through the menu

Main menu list

Setting and display
items
Vane•Louver•Vent.
(Lossnay)
High power
Timer On/Off timer
Auto-Off
timer
Weekly timer
OU silent mode
Restriction Temp.
range
Operation
lock
Energy Auto
saving return
Schedule
18
Use to set the vane angle.
•Select a desired vane setting from fi ve different settings.
Use to turn ON/OFF the louver.
•Select a desired setting from "ON" and "OFF."
Use to set the amount of ventilation.
•Select a desired setting from "Off," "Low," and "High."
Use to reach the comfortable room temperature quickly.
•Units can be operated in the High-power mode for up to 30 minutes.
Use to set the operation On/Off times. •Time can be set in 5-minute increments.
* Clock setting is required.
Use to set the Auto-Off time.
•Time can be set to a value from 30 to 240 in 10-minute increments.
Use to set the weekly operation On/Off times.
•Up to eight operation patterns can be set for each day.
* Clock setting is required.
* Not valid when the On/Off timer is enabled.
* 1ºC increments
Use to set the time periods in which priority is given to quiet
operation of outdoor units over temperature control. Set the Start/
Stop times for each day of the week.
•Select the desired silent level from "Normal," "Middle," and "Quiet."
* Clock setting is required.
Use to restrict the preset temperature range.
•Different temperature ranges can be set for different operation modes.
* 1ºC increments
Use to lock selected functions.
•The locked functions cannot be operated.
Use to get the units to operate at the preset temperature after
performing energy-save operation for a specifi ed time period.
•Time can be set to a value from 30 and 120 in 10-minute increments.
* This function will not be valid when the preset temperature ranges are
restricted.
* 1ºC increments
Set the start/stop times to operate the units in the energy-save
mode for each day of the week, and set the energy-saving rate.
•Up to four energy-save operation patterns can be set for each day.
•Time can be set in 5-minute increments.
•Energy-saving rate can be set to a value from 0% and 50 to 90% in
10% increments.
* Clock setting is required.
Setting details Reference
page
22
24
26
28
30
32
34
36
38
41