Product Features; Tool Specifications; Intended Use - Würth KTS 300-L Traducción Del Manual De Instrucciones De Servicio Original

OBJ_BUCH-0000000095-001.book Page 19 Monday, December 3, 2012 2:11 PM
Wear safety glasses/goggles.
Wear hearing protection. Exposure to
noise can cause hearing loss.
Wear dust protection mask.
Danger area! Keep hands, fingers or
arms away from this area.

Product Features

1 Saw head
2 Lever of transport safety-lock
3 Bolt hole
4 Lever for locking the handle
5 Handle
6 Lever for locking the table
7 Saw blade lock
8 Blade bolt
9 Tilting-head lock
10 Adjustment screw for possible deviation
11 Screw for 45° angle adjustment of the tilting head
12 Fastening screw of the fence
13 Stop screw for cutting depth
14 Cover
15 Screws of cover
16 Riving knife
17 Screw for adjustment of the upper stop
18 On/off switch for laser guidance
19 Release switch for chop sawing
20 On/Off switch
21 Lock button for working with the upper table
22 Fuse
23 Millimetre scale
24 Angle indicator
25 Lock of rotating saw table
26 Knob
27 Locking screws for rotating saw table
28 Lever for head-angle adjustment
29 Length stop
30 Bottom cover
31 Locking brackets
32 Locking screw for aluminium fence
33 Nuts
34 Height adjustment of table
35 Push stick
36 Screws for cover of drive
37 Plugs
38 Screws for battery compartment
39 Base

Tool Specifications

Combination Saw
Article number
Rated power input
No-load speed
Laser type
Laser class
Dimensions of the saw blade
–– Outer diameter
–– Bore size
Max. sawing capacity
–– Sawing at 0°x 0°
–– With 36 mm add-on
–– Sawing at 0°x 45°
–– Sawing at 45°x 0°
–– Sawing at 45°x 45°
–– Sawing on the top table
Weight
Class of protection

Intended Use

The machine is intended for sawing mitre cuts in wood
and plastic components, and aluminium profiles.
For damage caused by usage other than intended, the
user is responsible.
KTS 300-L
0701 176 X
1500 W
-1
3700 min
650 nm
< 5 mW
3R
300 mm
30 mm
160 x 95 mm
200 x 45 mm
160 x 64 mm
110 x 95 mm
75 x 64 mm
Max. 55 mm
20 kg
II
19