Information On The Product - EDELRID FLEX LITE Manual De Instrucciones

PPE showing signs of wear must be replaced, for in-
stance, if the edges of webbing and straps are dam-
aged, if fibres have come off the webbing, if seams
are damaged or show signs of wear, or if the equip-
ment has come in contact with chemicals. Watch out
for sharp burrs or signs of corrosion on metal parts
of the equipment. Repairs may only be performed as
outlined in the instructions of the manufacturer.
In case of extreme use (extreme signs of wear), for
instance, upon strain by a fall or when damage is vis-
ible, immediately remove the PPE from use and turn it
over to the manufacturer or a competent person for
inspection and/or repair; be sure to request a written
confirmation for the work done (Fig. 13).
Repairs may only be performed as outlined in the
instructions of the manufacturer.
INSPECTION
The product must be checked and, if necessary,
maintained whenever this is necessary but at least
yearly by the manufacturer, an expert or an autho-
rised testing centre.
In the process, it must be ensured among other
things that the product labelling is legible.
When the maximum service life of 10 years has been
reached, the PPE must be removed from further use.
STORAGE, TRANSPORT AND CARE
Storage
Store in a cool, dry, dark place outside transport
containers. Avoid contact with chemicals (caution:
battery acid!) Store without mechanical stress
caused by jamming, pressure or tension.
Transport
The product must be kept away from direct sunlight,
chemicals, dirt and mechanical damage. For this
purpose, a protective bag or special storage and
transport containers should be used.
Cleaning Fig. 10a and 11
Clean soiled products in luke-warm water (if neces-
sary, use pH-neutral soap). Rinse well. Dry at room
temperature, never use a tumble drier or dry close to
radiators! If required, halogen-free commercial disin-
fectants may be used.
If required, hinges of metal parts may be oiled after
cleaning.
WARNING! Failure to follow these instructions
may endanger life!
Material:
- Polyamide
- Polyester
- Aluminium
- Steel

INFORMATION ON THE PRODUCT:

Manufacturer: EDELRID
Product description:
Fall arrest harness according to EN 361,
ANSI/ASSE Z359.11
Model: Flex Lite
Size
Maximum user load
YYYY MM: Year and month of manufacture
Lot number: GV xxx xxxx
Identification: (to be entered by the user him/herself
if appropriate)
CE 0123: certification body monitoring the PPE pro-
duction
i-Symbol: Warning notices and instructions must be
read and observed
Fall arrest harness to EN 361: Marking A and A/2
(A/2 + A/2 = A ): catch eye