Tabla de contenido
EN
4. ADD DEVICE
4.1 QR code net-pairing (Recommended)
WARNING: The product only support 2.4GHz Wi-Fi network. It does not support 5GHz Wi-Fi network.
Before configuring Wi-Fi, please check and set / split the 2 Wireless networks from router parameter
settings with your network administrator. You The Wi-Fi password should not contain special characters of
~!@#$%^&*(). When configuring Wi-Fi, make sure your router, mobile and device are as close as possible
for a quick configuration of the device.
Connect smartphone to this Wi-Fi 2.4 Ghz network router with internet access. Activate location from
phone if not activated allready.
● App supports QR code net-pairing and Wi-Fi connection. You can choose to add device by other options.
● Power On the camera, and you can hear the broadcast "Wait for WiFi config", (if you heard nothing at all,
please click and hold "reset" button for 20 seconds to restore factory settings).
● When the mobile phone connecting to Wi-Fi, click "Add Device" or "+" icon (figure 1) on the Home screen
of the App, select "Security & Sensor"(figure 2)→ "Smart Camera", click "next step" (figure 3).
Check the name of your WiFi 2.4 Ghz Network, enter WiFi password and click "Confirm" (figure 4).
Figure 1
Figure 3
Figure 2
Figure 4
4
Tabla de contenido
