Technical Brief; Optional Accessories; Specified Conditions Of Use - Mondolfo Ferro As 933 Uso Y Mantenimiento

- Table top clamping capacity:
• inside clamping AS 933 - AS 943.............................................. 13" to 23"
• outside clamping AS 933 - AS 943............................................ 10" to 20"
• inside clamping AS 944........................................................ from 13" min
• outside clamping AS 944 ......................................................... 10" to 24"
- Rim width:
• AS 944 - AS 943..................................................................... 3,5" to 14"
• AS 933 .................................................................................. 3,5" to 12"
- Maximum tyre diameter: ..................................................... 1040mm (41")
- Maximum tyre width:
• AS 944 - AS 943................................................................. 360 mm (14")
• AS 933 .............................................................................. 305 mm (12")
- Table top rotation torque: ......................................... 1200Nm (at 400V 3ph)
- Table top rotation speed:
• AS 933 - AS 943 - AS 944.............................................................. 8 rpm
• AS 933 - AS 943 - AS 944 2V ...................................... min.6 max. 15 rpm
- Bead breaker opening:
• AS 933 ................................................................from 45 mm to 320 mm
• AS 944 - AS 943...................................................from 45 mm to 380 mm
- Bead breaking pressure: ...............................................15000 N (at 10 bar)
- Power supply voltage
• single-phase ................................................... 115-230±10%Volt 50/60Hz
• three-phase .................................................... 230-400±10%Volt 50/60Hz
• AS 933 - AS 943 - AS 944 2V ........................... 230±10%Volt 1ph 50/60Hz
- Motor rating
• single-phase ............................................................................. 0,75 kW
• three-phase .............................................................................. 0,75 kW
- Air pressure ...............................................................................8 - 10 bar
- Weight
• AS 933 .......................................................... 260 kg (T.I. version 274 kg)
• AS 943 .......................................................... 274 kg (T.I. version 288 kg)
• AS 944 .......................................................... 274 kg (T.I. version 288 kg)
- Noise level when running ..........................................................= 70 dB (A
SUPER RM power unit ...............................................................8-11100059
Presser roller arm ......................................................................8-11100060
MOB bead-rim presser arm.........................................................8-11100061
Disk holder arm ..........................................................................8-11100062
RM arm .....................................................................................8-11100063
Pax Kit on RH HELP ...................................................................8-11100048
PNEULIFT 60 wheel lift ..............................................................8-11100065
Set of four 4" adapters ................................................................8-11100041
Set of four 8" adapters ................................................................8-11100042
Set of four motorbike adapters ....................................................8-11100036
The AS 933, AS 943 and AS 944 tyre changers are designed exclusively for mounting and demounting tyres, using the
tools with which the machines are equipped in accordance with the instructions in this manual.
WARNING
Any other operations carried out on the machine are considered improper use and shall be
construed as negligence.
The machine is equipped with an inflation system that is independent from the systems described above. Extreme
caution must be exercised during the use of the machine inflation system (read INFLATION heading).
WARNING
When working with the machine it is strongly recommended to avoid using equipment or tools
not manufactured by MONDOLFO FERRO.

TECHNICAL BRIEF

OPTIONAL ACCESSORIES

SPECIFIED CONDITIONS OF USE

)
28