Quick Start - Siemens SITRANS LR200 Manual De Instrucciones

c) Press RIGHT arrow
current value is highlighted.
d) Key in a new value, and press RIGHT arrow
it.
The LCD returns to parameter view and displays the new
selection.
Key functions in Edit mode
Key Name
UP or
DOWN
arrow
RIGHT arrow
LEFT arrow
Clear
Decimal
point
Plus/minus
sign
xx
Numeral
to
Quick Start Wizard via the handheld programmer
Note: Each time the Quick Start Wizard is initiated, the start-up settings are factory defaults.
The Wizard will not recall previous user-defined settings.

1. Quick Start

a) Point the programmer at the display from a maximum distance of 300 mm (1 ft), then
press RIGHT arrow
b) Press RIGHT arrow
view.
Page EN-12 SITRANS LR200 (PROFIBUS PA) – QUICK START MANUAL
again to open Edit mode. The
Function
Selecting
• Scrolls to item.
options
• Increments or decrements digits
Numeric
editing
• Toggles plus/minus sign
• Accepts the data (writes the parameter)
Selecting
options
• Changes from Edit to Navigation mode
• Moves cursor one space to the right
Numeric
• or with cursor on Enter sign, accepts the data and changes
editing
from Edit to Navigation mode
Selecting
• Cancels Edit mode without changing the parameter
options
• Moves cursor to plus/minus sign if this is the first key
Numeric
pressed
editing
• or moves cursor one space to the left.
Numeric
• Erases the display.
editing
Numeric
• Enters a decimal point.
editing
Numeric
• Changes the sign of the entered value.
editing
Numeric
• Enters the corresponding character.
editing
to activate PROGRAM mode and open menu level 1.
twice to navigate to menu item 1.1 and open parameter
LOW CALIB.
to accept
7ML19985XD81
1.5
20.00 M
+20.00