Motorola PMLN8305 Manual De Instalación Y Usuario página 19

2.3.3
Cabling
CAUTION: To avoid visual or physical obstruction, route the cables down inside the door
moulding and beneath the carpets and seats. Allow sufficient slack at the connector ends of the
cables to reach the diplexer or cradle connectors. Before routing or connecting the cables, refer
to the following image.
Figure 10: Combined GPS/TETRA Typical Antenna Kit Connection Diagram
5m FME-FME
Procedure:
1 Connect the 5 m MFME RG174 cable to the antenna GPS connection.
2 Connect the 5 m FME RG58 cable to the antenna TETRA connection.
3 Connect the 5 m FME RG174 cable to the diplexer GPS input.
4 Connect the 5 m FME RG58 cable to the diplexer COMMS ANTENNA input.
5 Connect DC adapter cable (FTN6790) to 12/24 V supply.
6 Connect the 1 m FME cable from the diplexer CAR KIT input to the cradle RF cable.
GPS/ TETRA Antenna
COMMS GPS
ANTENNA ANTENNA
FME
MFME
5m MFME-FME
RG174
RG58
FME FME FME
DC
DC IN
COMMS GPS
INPUT
CAR KIT
FME
1m FME
To 12/24 V supply
Chapter 2 : Installation Procedures
Cradle
Diplexer
C
FME
MN007820A01-AB
A R K T I R F
19