BLACK&DECKER FIRE STORM FS110L Manual De Instrucciones página 17

Fig. 30C
Fig. 30E
CUTTING ALUMINUM
Aluminum extrusions used for making aluminum screens and storm windows can easily be cut with your compound
miter saw when fitted with a blade recommended for this material. The blade supplied with this saw is not
recommended for cutting aluminum. When cutting aluminum extrusions, or other sections that can be cut with a saw
blade and are within the capacity of the machine, position the material so the blade is cutting through the smallest
cross-section (Fig. 31). The wrong way to cut aluminum angles is illustrated in Fig. 32. Be sure to apply a stick wax
to the blade before cutting aluminum stock. This stick wax is available at most industrial mill supply houses. The
wax provides proper lubrication and keeps chips from adhering to the blade.
Never apply lubricant to the blade while the machine is running.
FENCE
RIGHT
Fig. 31
CUTTING BOWED MATERIAL
When cutting flat pieces, first check to see if the material is bowed. If it is, make sure the material is positioned on the
table as shown in Fig. 33.
If the material is positioned the wrong way (Fig. 34), the workpiece will pinch the blade near the completion of the
cut and may cause the saw to jump or move.
RIGHT
Fig. 33
Fig. 30D
Fig. 30F
BLADE
FENCE
Fig. 32
Fig. 34
17
BLADE
WRONG
WRONG