Using The Password - Nice 1010GSM Instrucciones Y Advertencias Para La Instalación Y El Uso

4

USING THE PASSWORD

If you want to carry out actuations, request of status and setting of
equipment, among others, without registering your number in the
equipment, insert the operating password at the beginning of the message.
It should be pointed out that the numbers that received the messages have
to be registered in order to receive the event notification in the inputs.
Command: ?
Function: Conduct operation with validation by password, insert ? and
password at the beginning of the command or setting. Note: The standard
password is 0000.
Parameter: Password containing 4 digits.
Example 1: For actuation of the output 0X, with password validation, send:
?password*L0X
Note: x - number of the output (1 or 2).
Example 2: For requesting the status, with password validation, send:
?password*ST1
Example 3: For setting the actuation time of the output 05 with 20
seconds, with password validation, send: ?password#TP05020
NOTE: The password can be used, with or without phone number registered in the
equipment, but if your number is registered, the password can be omitted from
the message, through the direct delivery of the command
For change of standard password (0000), send ?0000#SENYYYY (where
YYYY is the new password). Example: ?000#SEN1234
OPERATION WITH PASSWORD
PASSWORD CHANGE
63
ENGLISH_